Technique
Why Does My Espresso Taste Sour or Bitter?
Sour and bitter are the two most common complaints about a home espresso shot, and both usually point to one of a small number of specific, fixable causes.
Sour usually means under-extraction
A sour, sharp shot is commonly under-extracted — grind coarser, or increase yield at the same dose, and taste again before changing anything else. Under-extraction happens when water passes through the puck too quickly to dissolve enough of the coffee's soluble compounds.
Bitter usually means over-extraction
A harsh, bitter shot is commonly over-extracted — grind finer, or reduce yield at the same dose, as the first thing to try. Over-extraction happens when water spends too long in contact with the grounds, pulling out compounds that are better left behind.
Both at once often means channeling
A shot that tastes sour and bitter simultaneously often means uneven extraction (channeling) rather than a simple too-fine or too-coarse grind — check your distribution and tamp technique, and see our guide on channeling causes and fixes, before assuming the grind setting itself is wrong.
A simple diagnostic order to follow
First, rule out channeling by checking tamp and distribution technique, since this can produce the same symptoms as a grind problem and wastes time if misdiagnosed. Second, if the shot is cleanly sour or cleanly bitter (not both), adjust grind size in the direction indicated above, one step at a time, tasting between each change.
When the fix isn’t grind at all
If adjusting grind in both directions fails to remove a persistent sour or bitter note, the more likely cause is the bean itself — a very light roast can read as sour even when well-extracted, and a very dark roast can read as bitter even when under-extracted. At that point, the fix is a different bean, not a different grind setting.